AudioCodes 24-Port FXS Patch Panel for MediaPack MP-524 | 50-Pin D-Sub
For a special discount on bulk orders, please contact us at info@voicedepot.ca
Estimated dispatch is 1–3 weeks after order placement. Domestic transit time is additional.
The AudioCodes 24-Port FXS Patch Panel (Part #MP-500-PANEL-24) is an enterprise 19-inch 1U rackmount breakout accessory engineered specifically for the AudioCodes MediaPack MP-524 analog VoIP gateway with 50-pin D-Sub interface. Equipped with an integrated 2-meter (78.7-inch) cable terminating in a male 50-pin D-Sub (Telco/RJ21) connector, this passive patch panel converts the gateway’s high-density analog trunk into 24 individually labeled, front-facing RJ-11 modular jacks for streamlined, organized cable distribution without manual field punching.
Recommended Deployment & Work Environments
- Server & Telecom Equipment Racks: Mounts directly into standard 19-inch equipment racks above or below the MediaPack MP-524, providing a clean, service-ready patch field that prevents cable strain and clutter.
- Hospitality & Multi-Dwelling Unit (MDU) Line Breakouts: Connects analog guest room telephones, physical fax machines, dial-up modems, and front-desk phones to your modern VoIP network via standard RJ-11 patch cords.
- Structured PBX-to-IP Upgrades: Eliminates the need for cumbersome 66-blocks or 110-punchdown fields by providing direct modular termination for all 24 gateway channels in a single rack unit.
High-Density Design & Secure Fastening
- Pre-Terminated 2-Meter Trunk: Includes an integrated 2,000 mm multi-pair cable with pre-mapped pinouts, removing installation guesswork and reducing on-site termination labor.
- Dual Retention Fasteners: Features built-in hardware accommodating both hinged bail-lock clips and threaded captive thumbscrews for vibration-resistant attachment to the MP-524 chassis.
- Numbered Port Mapping: Clearly visible 1–24 front port labels provide immediate visual reference matching the software channel configuration inside the MediaPack management interface.
System Compatibility & Deployment Guide
This patch panel is engineered for AudioCodes MediaPack gateways featuring 50-pin D-Sub telephony connectors:
| Gateway Model | Port Configuration | Compatibility & Application |
|---|---|---|
| MediaPack MP-524 (D-Sub Model) | 1x 50-Pin D-Sub Female (Ports 1–24) | Fully Compatible: Single panel breaks out 100% of the gateway's 24 analog FXS ports. |
| MediaPack MP-524 (RJ-11 Model) | 24x Native RJ-11 Ports on Rear Panel | Not Needed: Gateway already incorporates onboard RJ-11 ports. |
| MediaPack MP-516 | 16x Native RJ-11 Ports on Rear Panel | Not Applicable: MP-516 utilizes onboard RJ-11 jacks exclusively. |
| MediaPack MP-532 | 2x 50-Pin D-Sub Female (32 Ports Total) | Requires Kit: The 32-channel MP-532 requires the complete multi-panel kit (MP532-PATCH-PNL-KIT) to terminate all 32 lines. |
Frequently Asked Questions
Does this patch panel require an external power supply?
No. The patch panel is completely passive. It requires no AC or DC power and solely routes electrical voice signals directly from the MP-524 gateway's 50-pin connector.
Can I use this with the standard RJ-11 version of the MP-524?
No. AudioCodes manufactures the MP-524 in two distinct factory hardware configurations: one with native RJ-11 ports on the rear chassis, and one with a single 50-pin D-Sub connector. This panel is exclusively required for the 50-pin D-Sub version.
Are rackmount ears included?
Yes. The front faceplate features integrated 19-inch 1U rackmount flanges on both sides for direct installation into standard telecom and network racks.
Can I install this patch panel for lines leaving the building?
Yes. However, per AudioCodes installation instructions, when analog telephone lines leave the building, primary lightning and surge protection (such as a 350V 3-electrode Gas Discharge Tube on an MDF) must be implemented between the patch panel and outside plant wiring.
Technical Specifications & Package Contents
Technical Specifications of AudioCodes MP-524 FXS Patch Panel
| Feature | Specification |
|---|---|
| Product Name / SKU | AudioCodes 24-Port FXS Patch Panel (MP-500-PANEL-24) |
| Form Factor | 1U Standard 19-Inch Rackmount |
| Telephony Ports | 24x RJ-11 Modular Jack Interfaces (Numbered 1–24) |
| Gateway Interface | 1x 50-Pin D-Sub (Telco / Amphenol RJ21) Male Connector |
| Integrated Cable Length | 2,000 mm ± 50 mm (2 meters / 78.7 inches) |
| Retention Hardware | Supports Chassis Bail Locks and Captive Screw Coupling |
| Construction | Heavy-Duty Black Powder-Coated Steel Chassis |
| Compliance | RoHS, WEEE Compliant |
What's included in the Package
- 1x AudioCodes 19-Inch 1U 24-Port FXS Patch Panel with Integrated 2m 50-Pin D-Sub Cable
- Integrated Left & Right 19-Inch Rackmount Ear Flanges
- Connector Fastening Hardware (Captive Screws & Retaining Bail Locks)